• £0.00 GBP
    0

Waste Trap - Universal - Bath - Basin - Flexible Pipe Connector - 1 1/4 1 1/2

Be the first to review this product

Waste Trap - Universal - Bath - Basin - Flexible Pipe Connector - 1 1/4 1 1/2

Availability: In stock

Price :
Price From: £6.50
GBP

* Required Fields

Price From: £6.50

Details

Universal Flexible Waste pipe or Trap 
 
Available In three size / type options 
 
1 1/4" to 32 or 40 mm diameter (male spigot) (" Quoted In Internationally adopted B.S.P.T. British Standard Pipe Thread - Actual thread diameter is approx 1.650")
For example - 1 1/4 (5/4") Plastic nut with rubber seal at one end for connection to items such as wash basin waste connection. Other end connected to 32 or 40 mm female *Pushfit / *Solvent / Compression connector.
 
1 1/2" to 40 or 50 mm diameter (male spigot) ("Quoted In Internationally adopted B.S.P.T. British Standard Pipe Thread - Actual outside thread diameter is approx 1.882")
For example - 1 1/2 (6/4") Plastic nut with rubber seal at one end for connection to items such as bath waste connection. Other end connected to 40 or 50 mm female *Pushfit / *Solvent / Compression connector.
 
40 or 50 mm diameter (male spigot) to 40 or 50 mm diameter (male spigot)
For example - 50mm Plastic spigot at one end for connection to items such as 50mm Shower Trap. Other end connected to 40 or 50 mm female *Pushfit / *Solvent / Compression connector. 
 
Please note:
Quoted In B.S.P.T. British Standard Pipe Thread (See below for more Info)
The Unit supplied will be either the Alca or Goflex model. The two makes are almost identical however there may be some minor differences In moulding etc between the two. 
 
Main Picture shows the Goflex & the two Technical drawings show the Alca.
 
*(Diameter's quoted (32,40 & 50mm) are actual sizes**. Some other suppliers use slightly smaller or larger fittings but may still refer to them as 32,40 or 50 mm so it is recommended that to be certain your fittings are compatible you measure the internal diameter of your fittings to ensure a suitable seal / Fitting will be achieved.
 
*(Some solvent pipes use a larger pipe diameter so measure your pipe and fittings diameters to ensure correct sizing is used. Ours is quoted in actual sizes** i.e 40 mm is 40 mm. Also note sometimes the addition of extra glue can resolve small tolerance differences. 
 
**(+/- some small acceptable tolerance)
 
British Standard Pipe Thread is a family of standard screw thread types that has been adopted internationally for interconnecting and sealing pipe ends by mating an external (male) with an internal (female) thread.
 
A list of 16 thread sizes are defined by the standards, ranging from 1/16 Inch to 6 Inch. The size was originally based on the inner diameter measured in inches of a steel tube for which the thread was intended. This often causes confusion, as people think the size refers to the outside diameter of the male thread.
 

Write Your Own Review

Only registered users can write reviews. Please, log in or register

Product Tags

Use spaces to separate tags. Use single quotes (') for phrases.

There are currently no education related articles.
No other information is currently available.

UPSELL PRODUCT(S)

There are no products matching the selection.

Brands