Your Cart Is Empty!
40 or 50 mm diameter (male spigot) to 40 or 50 mm diameter (male spigot)
For example - 50mm Plastic spigot at one end for connection to items such as 50mm Shower Trap. Other end connected to 40 or 50 mm female *Pushfit / *Solvent / Compression connector.
*(Diameter's quoted (40 & 50mm) are actual sizes**. Some other suppliers use slightly smaller or larger fittings but may still refer to them as 40 or 50 mm so it is recommended that to be certain your fittings are compatible you measure the internal diameter of your fittings to ensure a suitable seal / Fitting will be achieved.
*(Some solvent pipes use a larger pipe diameter so measure your pipe and fittings diameters to ensure correct sizing is used. Ours is quoted in actual sizes** i.e 40 mm is 40 mm. Also note sometimes the addition of extra glue can resolve small tolerance differences.
**(+/- some small acceptable tolerance)
There are currently no education related articles.
No other information is currently available.